d raid not rebulding — resync=pending
You have problems with automatic rebuilding raid 1 (md) on deb...
<code>mdadm --readwrite /dev/mdX</code>
and the process of rebuilding starts cat /proc/mdstatus
<code>
[===>...] resync = 16.2% (324736/2000000) finish=... de>
Den Status kann man jederzeit aus der Datei /proc/mdstat auslesen, z.B. mit
<code>
watch -n1 cat /
l Software-RAID on Debian 4.0 (Etch)
Das hab ich probiert (2. Versuch):
[[http://www.debian-administra... sdc2) zum Array erläutert.
If you're using the /proc filesystem, /proc/mdstat gives you informations about md devices status. This file is not currently ... id5 var
</code>
Status von SW-RAid:
<code>
cat /proc/mdstat
</code>
Für Software-Raid gibts u.a. mdad
unter Linux reparieren]]
====== Besonderheiten / Probleme Software-Raid5 ======
Eine meiner Raid5-Pla... tellen ging (nach Partitionieren der neuen Platte problemlos mit ''mdadm /dev/md0 -a /dev/sdb1''. Nach ...
</code>
----
den Status checken:
<code>
cat /proc/mdstat
mdadm --detail /dev/md1
</code>
bzw. beim Rebuild (um ihn zu verfolgen, Aktualisierung alle 5 Sek.)
<code>
watch -n5 cat /proc/mdstat
</code>