accordingly. If you want to stick the system into powersave mode - load the cpufreq_powersave.ko module
cpufreq # modprobe cpufreq_powersa... efine some decent defaults
#POWERMODE=performance
POWERMODE=powersave
SPEED=
[ -f /etc/sysconfig/cpufreq ] && sour... how we were called.
case "$1" in
start|low|lo)
POWERMODE=powersave
echo -n "Loading modules: ";
modprobe longh... cpu/cpu0/cpufreq/scaling_cur_freq`
echo "Actual powerstatus: ${DRIVER}($POWERMODE) @ ${SPEED}KHz"
else
echo "CPU Frequency S
me. If you don't want to be annoyed by short
# powerfailures, make sure that apccontrol powerout does nothing
# i.e. comment out the wall.
ON... use the initation of a shutdown.
#
# If during a power failure, the remaining battery percentage
# (as r... a system shutdown.
BATTERYLEVEL 5
# If during a power failure, the remaining runtime in minutes
# (as c... tiate a system shutdown.
MINUTES 3
# If during a power failure, the UPS has run on batteries for TIMEOUT
recovery recovery resets_all_to_default u need to power off unit. tbl_
3com OfficeConnect Wireless 11g C... recovery recovery resets_all_to_default u need to power off unit. tbl_
3com OfficeConnect Wireless 11g C... Admin (none) Admin case sensitive username
Dell PowerConnect 2724 HTTP admin (none) Admin
Demarc Netw... latform All Multi public (none) Guest
EverFocus PowerPlex EDR1600 Multi admin admin Admin
EverFocus P
exit
===== How this works =====
Pressing the power button runs a script called /etc/acpi/powerbtn.sh//
This script then calls the shutdown_dial... ver, some people are happy with editing /etc/acpi/powerbtn.sh to just say:
#!/bin/sh
/bin/kill -SI... owing lines after the # comments in the /etc/acpi/powerbtn.sh script.
<code>if ps -Af | grep '[s]hutdown_... /fastshutdown.sh
fi</code>
The first press of the power button will bring up the normal options, but a se
=== WARNING =====
The idle3 timer seems to be a power on only setting. That means that the drive needs to be powered OFF and then ON to use the new setting.
===== D
>
By default a switch toggles the corresponding power state (e.g., Switch1 controls Power1). Every time the switch gets flipped the power state of the relay toggles.
Damit zusammenhängen... <x> 15</code> you can decouple Switch<x> from its power output and it will instead send MQTT messages in ... duration to keep the corresponding Relay ON when Power<x> ON command is issued. After this amount of tim
m of the cabinet. The cube has a little wall-wart power supply that you can plug into the utility power outlet with the help of the adapter cord that com
B' 'GiB'</td><td>Unit conversion (<acronym title="powers of 10">SI</acronym> to <acronym title="powers of 2">IEC</acronym> prefixes)</td></tr>
<tr><t... >#</td><td class="nw">smartctl -A /dev/sda | grep Power_On_Hours</td><td>How long has this disk (system) been powered on in total</td></tr>
<tr><td>#</td><td class... class="nw"><a href="lkdb/mc.html">mc</a></td><td>Powerful file manager that can browse rpm, tar, ftp, ss
he lid!
===== Differing Behaviour Depending On Power Source =====
If you would like eeePC to **stay o...
If you'd rather just shut the screen off to save power use
<code bash>
#!/bin/sh
LID_STATE=`cat /proc/a... etc/acpi/lidbtn.sh
===== How to suspend with the power button =====
If you disabled suspend-on-close wi...
* Fn-F1 suspends the computer
* Pressing the power button will give you a menu with suspend as an op
in/bf/bf.html|bogusforth]] - Obfuscated language, powerful, quite complete, unmaintained, based on forth,... ryone with an obfuscated syntax, and designing as powerful a language as possible with a tiny implementat... rogramming Language]] - Toy language. Harness the power of XML, by using it as a programming language. Co
