Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- elphel [2015/11/05 20:30] – [NC353L] gerald
+++ elphel [2024/02/29 13:36] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 7: / Zeile 7: @@
 ===== NC353L =====
+Firmware: [[https://sourceforge.net/projects/elphel/]]
+Prozedur: [[https://www.elphel.com/wiki/353_firmware_upgrade_procedure]]
 +SF338M5C
@@ Zeile 13: / Zeile 17: @@
 [[http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/]]
+PHP: [[http://wiki.elphel.com/index.php?title=PHP_in_Elphel_cameras]]
+https://www.elphel.com/wiki/Using_the_cameras
+Default Setup
+The default IP address of the camera is 192.168.0.9 netmask 255.255.255.0
+You should be able to ping the camera from another machine on the same subnet.
+By default, the following TCP ports are open:
+/ftp
+/telnet
+/http (lighttpd web server)
+/http (boa )
+Logging in
+You can log in to the camera via telnet on TCP port 23
+User: root
+Password: pass
+Serial port
+The serial port settings (additional IO board 10349 is needed)
+Speed: 19200 8N1
+RTS/CTS: None
+XON/XOFF : None
+Changing IP address of the camera
+The camera network settings can be changed by going to:
+http://<camera_ip>/axis.html
+from an attached computer
+Interessante Abschlussarbeit:
+Final Graduate Project:Capture Module for IP Elphel 353 cameras. Evaluation of performance.
+{{ ::angel.torres_90934.pdf |}}
+==== Zone Minder ====
+[[https://www.elphel.com/wiki/Elphel_cameras_and_Zoneminder]]
+Parameter von ccam.cgi: [[https://www.elphel.com/wiki/Ccam.cgi]]

Nach oben

elphel.1446755431.txt.gz · Zuletzt geändert: 2024/02/29 13:35 (Externe Bearbeitung)

Übersicht Letzte Änderungen