Open Hardware Camera
Firmware: https://sourceforge.net/projects/elphel/ Prozedur: https://www.elphel.com/wiki/353_firmware_upgrade_procedure
+SF338M5C
http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/
PHP: http://wiki.elphel.com/index.php?title=PHP_in_Elphel_cameras
https://www.elphel.com/wiki/Using_the_cameras
Default Setup The default IP address of the camera is 192.168.0.9 netmask 255.255.255.0
You should be able to ping the camera from another machine on the same subnet.
By default, the following TCP ports are open:
21/ftp
23/telnet
80/http (lighttpd web server)
82/http (boa )
Logging in You can log in to the camera via telnet on TCP port 23
User: root
Password: pass
Serial port The serial port settings (additional IO board 10349 is needed)
Speed: 19200 8N1
RTS/CTS: None
XON/XOFF : None
Changing IP address of the camera The camera network settings can be changed by going to:
http:<camera_ip>/axis.html from an attached computer Interessante Abschlussarbeit: Final Graduate Project:Capture Module for IP Elphel 353 cameras. Evaluation of performance. angel.torres_90934.pdf ==== Zone Minder ==== https://www.elphel.com/wiki/Elphel_cameras_and_Zoneminder Parameter von ccam.cgi: https://www.elphel.com/wiki/Ccam.cgi