====== Elphel ======

Open Hardware Camera

[[http://wiki.elphel.com/index.php?title=Main_Page|elphel-Wiki]]


===== NC353L =====

Firmware: [[https://sourceforge.net/projects/elphel/]]
Prozedur: [[https://www.elphel.com/wiki/353_firmware_upgrade_procedure]]


+SF338M5C

[[http://wiki.elphel.com/index.php?title=Elphel_353_series_quick_start_guide|Quick start]]

[[http://elphel.cvs.sourceforge.net/viewvc/elphel/elphel353-8.0/]]

PHP: [[http://wiki.elphel.com/index.php?title=PHP_in_Elphel_cameras]]



https://www.elphel.com/wiki/Using_the_cameras

Default Setup
The default IP address of the camera is 192.168.0.9 netmask 255.255.255.0

You should be able to ping the camera from another machine on the same subnet.

By default, the following TCP ports are open:

21/ftp

23/telnet

80/http (lighttpd web server)

82/http (boa )

Logging in
You can log in to the camera via telnet on TCP port 23

User: root

Password: pass

Serial port
The serial port settings (additional IO board 10349 is needed)

Speed: 19200 8N1

RTS/CTS: None

XON/XOFF : None

Changing IP address of the camera
The camera network settings can be changed by going to:

http://<camera_ip>/axis.html

from an attached computer


Interessante Abschlussarbeit: 

Final Graduate Project:Capture Module for IP Elphel 353 cameras. Evaluation of performance.

{{ ::angel.torres_90934.pdf |}}
==== Zone Minder ====


[[https://www.elphel.com/wiki/Elphel_cameras_and_Zoneminder]]


Parameter von ccam.cgi: [[https://www.elphel.com/wiki/Ccam.cgi]]