Quelle1)

i dont know why all this while im not using webcam in linux until last week i try to plug the webcam in my ubuntu. It appear great result because the webcam driver detected by need to do something more to make its working better … now lets start by checking the device detected ..

gerald@gerald-kubuntu:~$ lsusb
Bus 004 Device 002: ID 05e3:070e Genesys Logic, Inc. X-PRO CR20xA USB 2.0 Internal Card Reader
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 005: ID 0ac8:303b Z-Star Microelectronics Corp. ZC0303 WebCam
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 001: ID 0000:0000

With this information we can know the Vendor_id=0ac8 and the Product_id=301b . We could also see this using the graphical user interfase usbview. Another thing that we can see is the manufacturer of the chipset Z-Star/Vimicro (that is also used in many other cheap webcams) Among the output of the usbview program, we can see somthing like this Manufacturer: Vimicro Corp. I’m going to summarize the steps I took:

1) Download and untar the file gspcav120071224.tar.gz:
wget -c http://mxhaard.free.fr/spca50x/Download/gspcav1-20071224.tar.gz

tar xvfz gspcav1­20071224.tar.gz

2) Compile and install the driver:
cd gspcav1-20071224 
make clean
 make 
sudo make install
3) This is the extra step that I had to do:
sudo gedit /etc/modprobe.d/options

and add an option for this driver:

options gspca force_rgb=1
sudo apt-get install camorama

then try to open camorama, if cant open the application,try this:

$sudo lsmod |grep gspca
 gspca 660176 0
 videodev 28160 2 gspca,zc0301
 usbcore 134280 7 gspca,zc0301,usb_storage,libusual,ehci_hcd,uhci_hcd

Remove the zc0301 module:

$sudo modprobe -r zc0301

Insert module gspca back:

$ sudo modprobe gspca

Give a check first:

$ lsmod |grep gspca
 gspca 660176 0
 videodev 28160 1 gspca
 usbcore 134280 6 gspca,usb_storage,libusual,ehci_hcd,uhci_hcd

Let it be more confident:

$ lsmod | grep videodev
 videodev 28160 1 gspca
 v4l1_compat 15236 1 videodev
 v4l2_common 25216 1 videodev

If it still can’t run the camorama : check the device permission:

$ ls -l /dev/video0
 crw-rw—- 1 root video 81, 0 2008-01-27 08:10 /dev/video0

Device video0 running with user group video,so u should change the permission:

$ sudo chmod 777 /dev/video0
 $ ls -l /dev/video0
 crwxrwxrwx 1 root video 81, 0 2008-01-27 08:10 /dev/video0

@ the easier way is installing the gspca from repo (i forgot to check in repo, gspca is in it):

gerald@thinkbuntu:~$ sudo apt-get install gspca-source

Hope it working for u all because its working for me!!


Gerald Nasenbrecher 2008/07/09 14:12Still dont work ('Webcam mit Tele-Aufsatz 7×18' from Discount 'Plus') Now have the solution:

HY Just a sugestion…try to install Ekiga , aftre that in the setup pannel you will have to choice betwen V4L and V4L2 because i see this V4L2 driver it is loaded and the device is recognized..try thys just to see if it is ok ..and your cam.it work. Good lock. Quelle2)